240 GIGABYTE SSD

 7,500.00

In stock

  • Interface
    SATA 6.0Gb/s
  • Form Factor
    2.5-inch internal SSD
  • Total Capacity
    120GB
  • Warranty
    Limited 3-year or 75TBW
  • NAND
    NAND Flash
  • External DDR Cache
    N/A
  • Sequential Read speed
    up to 500 MB/s ; Minimum 350 MB/s
  • Sequential Write speed
    up to 380 MB/s ; Minimum 280 MB/s
  • Random Read IOPS
    Up to 50k
  • Random Write IOPS
    Up to 60k
  • Dimension (W x H x L)
    69.85 x 7 x 100 mm
  • Mean time between failure (MTBF)
    2M hours
  • Power Consumption (Active)
    Average: R : 2240mW; W : 2610mW
  • Power Consumption (Idle)
    170mW
  • Temperature (Operating)
    0°C to 70°C
  • Temperature (Storage)
    -40°C to 85°C
  • Note
    * Test system configuration: configuration may vary by models, we will choose the latest platform for verification.
    * Performance may vary based on SSD's firmware version and system hardware & configuration. Sequential performance measurements based on CrystalDiskMark v.5.1.2 and I0meter 1.1.0.
    * Speeds based on internal testing. Actual performance may vary.
    * TBW (Terabyte Written): Terabytes Written" is the total amount of data that can be written into an SSD before it is likely to fail.
    * 1GB = 1 billion bytes. Actual useable capacity may vary.
    * 3 years or 75 TBW, whichever comes first.
* The entire materials provided herein are for reference only. GIGABYTE reserves the right to modify or revise the content at any time without prior notice.
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.
Compare

240 GIGABYTE SSD

Performance. Stability
GIGABYTE Solid State Drive
Solid State Drive VS. Traditional Hard Drive

SSD 2.5″

Shock resistant up to 1500g/0.5ms
Controller
NAND Flash Memory

HDD 3.5″

Shock resistant up to 350g/2ms
Platters
Spindle
R/W Head
Actuator Arm
Actuator Axis
Actuator
  1. Performance
  2. Power Consumption
  3. Vibration Resistance
  4. Noise
  5. Heat Produced
  1. Solid State Drive
  2. Faster
  3. Lower
  4. Better
  5. No
  6. Lower
  1. Traditional Hard Drive
  2. Slower
  3. Higher
  4. Lower
  5. Yes
  6. Higher
Reliability You Can Trust – 3 Years Limited Warranty

GIGABYTE SSDs possess both high data transferring speed and enhanced endurance, providing durable MTBF* of 2.0 million hours and 3 years or 75 TBW** limited warranty***.

* MTBF (Mean Time Between Failure): Measure of how reliable a hardware product or component is.
** TBW (Terabyte Written):the total amount of data that can be written into an SSD before it is likely to fail.
*** 3 years or 75 TBW, whichever comes first.
GIGABYTE SSD
Capacity*ModelSequential Read MB/s**
(Up to)
Sequential Write MB/s**
(Up to)
Random Read IOPS**
(Up to)
Random Write IOPS**
(Up to)
120GBGP-GSTFS31120GNTD50038050K60K
240GBGP-GSTFS31240GNTD50042050K75K
256GBGP-GSTFS31256GTND52050080K85K
480GBGP-GSTFS31480GNTD55048075K70K
* Note: 1GB = 1 billion bytes. Actual useable capacity may vary.
** Speeds based on internal testing. Actual performance may vary.
Submit your review

Your email address will not be published. Required fields are marked *

Reviews

There are no reviews yet.

Shop By Department